Skip to content

W-DALI module

Welcome to the W-DALI Node module integration site. It contains specifications of the OEM module as well as any practical information needed to successfully integrate W-DALI into a product. For general information about W-DALI, please visit the W-DALI page.

Product description

The LumenRadio W-DALI Node module is an innovative solution at the forefront of modern lighting control. It enables IEC 62386 without the constraints of physical cabling, providing wireless control of DALI-2 compatible luminaires and devices.

Harnessing the robust capabilities of LumenRadio's MiraMesh technology, the W-DALI Node module ensures reliable radio communication through its self-forming and self-healing wireless mesh architecture. MiraMesh is already trusted by numerous installations worldwide, spanning from lighting control to industrial sensor networks and building automation.

Operating within the internationally approved ISM band at 2.4GHz, the W-DALI Node module offers an operational range of up to 500 meters in line-of-sight conditions. This extensive reach, coupled with its scalable network architecture, allows for flexible deployment scenarios, catering to diverse installation needs.

At its essence, the W-DALI Node module prioritizes seamless integration and compatibility. A W-DALI network consist of a root gateway such as LumenRadio W-DALI DIN Rail and a number of W-DALI Node modules. The gateway communicates over traditional DALI-2 with a controller, and the Node modules in turn do the same with the luminaire or other device in which it is integrated. This "wireless cable" approach allows it to seamlessly integrate into existing wired systems. Additionally, each node supports up to 10 wired devices on its local bus, meaning that a luminaire with an integrated W-DALI Node can act as a bridge to the gateway for a local traditional DALI-2 bus.

The W-DALI Node module requires very limited external circuitry for integration, meaning that it can easily be integrated into a DALI-2 compatible device.

Features

  • IEC 62386 compliant
  • Plug and play integration into a DALI-2 compatible device
  • Instant wireless setup and fully compatible with LumenRadio W-DALI DIN rail and W-DALI Node
  • Built upon LumenRadios patented MiraMesh technology
  • Self-optimizing network – the mesh network will always find the best way to send messages through the network between devices.
  • Compliant against ETSI EN 300 328 (v2.2.2)
  • Compact size with few external components required.
  • Over-the-air firmware upgrades
  • Minimal external circuitry needed

Specifications

  • Range: up to 500m free line of sight between two meshing units.
  • Output (ERP): Max 20 dBm
  • Sensitivity: -93dBm
  • Frequency band: 2.45 GHz, ISM band (2402-2480 MHz)
  • Up to 10 wired devices on each local Node bus
  • Number of hops: 8 hops in the meshing network
  • Dimensions: 33.5 x 18.5 x 3.77mm
  • Supply voltage 3.0 - 3.6V
  • Peak average current consumption 150mA in high power mode