TX protocol selection

Change protocol via SPI

See the SPI interface page.

By pressing the link switch shortly 3 times, and then press-and-hold the button for at least 3 seconds enters TX/RX mode selection. The STATUS LED will blink in different patterns to indicate the currently selected protocol.

Press link switch momentarily to toggle mode, press-and-hold the link switch for at least 3 seconds to store the selection.

One flash, then a pause: W-DMX G3 selected.

Two flashes, then a pause: W-DMX G4S selected.

Three flashes, then a pause: CRMX selected.