Link switch
Link switch input¶
The link switch input (LINK_SW) can be used to interface with a momentary (monostable) closing push button to facilitate a simple user interface. This is an alternative to using the SPI interface to integrate into a host device's menu system.
This signal shall be pulled to VDD using an external 4.7kΩ-10kΩ resistor to ensure proper function.
The switch input has two functions: controlling the radio link or to force driver update mode. Please see the table below for details about the functions of the switch input.
| Function | Conditions |
|---|---|
| Unlink from transmitter | Hold signal low (button pressed) for >3 seconds. |
| Force driver update mode | Hold signal low (button pressed) during power on. |